23-21
Floor Area Regulations for R1 Through R5 Districts
R1 R2 R3 R4 R5
In the districts indicated, the maximum residential floor area ratio shall be as set forth in the following table. Separate maximum residential floor area ratios are set forth for standard zoning lots and zoning lots that are qualifying residential sites.
MAXIMUM FLOOR AREA RATIO FOR R1-R5 DISTRICTS
|
District |
Standard zoning lots |
Qualifying residential sites |
|
R1-2A R1-1 R1-2 R2A R2 R3A R3X R3-1 R3-2 |
0.751
|
1.00
|
|
R2X |
1.00 |
1.00 |
|
R4A R4B R4 |
1.00 |
1.50 |
|
R5A R5B R5 |
1.50 |
2.00 |
|
R5D |
2.00 |
2.00 |
1 For standard zoning lots with a lot area that exceeds 4,000 square feet, the maximum residential floor area associated with any single dwelling unit shall not exceed an equivalent floor area ratio of 0.60.
