C1 C2 C3 C4 C5 C6 C7 C8

Use Group X consists of uses engaged in the mechanical, physical, or chemical transformation of materials into new goods. The provisions regulating uses classified in this Use Group are set forth as follows:

1. Section 32-201 (Use Group X – general use allowances) which includes the compilation of uses in the Use Group table;
2. Section 32-202 (Use Group X – uses subject to size limitations) for size restrictions that apply to certain uses, as denoted with an “S” in the Use Group table; 
3. Section 32-203 (Use Group X – uses subject to additional conditions) for additional conditions that apply to certain uses, as denoted with a “P” in the Use Group table; and
4. Section 32-204 (Use Group X – additional provisions for parking requirement category) for uses with more than one parking requirement category or other applicable parking provisions, as denoted with “*” in the Use Group table.

The provisions of Sections 32-202 and 32-203, except as otherwise specified in such Sections, may be modified by special permit of the Board of Standards and Appeals, in accordance with Section 73-211 (Production uses), or by special permit of the City Planning Commission, in accordance with Section 74-211 (Production uses).