Quality Housing Program
The applicability of the Quality Housing Program to community facility buildings or portions of buildings containing community facility uses is set forth in this Section, except as modified in Section 24-012 (Exceptions to the bulk regulations of this Chapter).
In R6A, R6B, R7A, R7B, R7D, R7X, R8A, R8B, R8X, R9A, R9D, R9X, R10A or R10X Districts, any community facility building or portion of a building containing community facility uses shall comply with the height and setback regulations for Quality Housing buildings set forth in Article II, Chapter 3. In all other R6, R7, R8, R9 or R10 Districts, if the residential portion of a building containing a community facility use is developed or enlarged pursuant to the Quality Housing Program, the entire building shall comply with the height and setback regulations for Quality Housing buildings set forth in Article II, Chapter 3. However, for houses of worship in R8A, R8X, R9A, R9X, R10A and R10X Districts or, where located in Quality Housing buildings in other R8 through R10 Districts without a letter suffix, the street wall location provisions of Section 23-661 are optional.
For all such buildings using the height and setback regulations for Quality Housing buildings, any permitted obstruction listed in Section 24-51 that is not listed in Section 23-62 shall also be considered a permitted obstruction.
Special regulations are set forth for buildings containing long-term care facilities or philanthropic or non-profit institutions with sleeping accommodations in Section 24-013 (Special provisions for certain community facility uses).
Quality Housing buildings shall comply with the additional provisions set forth in Article II, Chapter 8 (The Quality Housing Program). In R5D Districts, certain provisions of Article II, Chapter 8, shall apply as set forth in Section 28-01 (Applicability of this Chapter).